my life, my thoughts, my world.

A while back, I finished my keezer build and kegged my first beer. Carbonating that beer seems to be causing me more problems than it should. For now, I am going to blame my lack of patience. There is some carbonation, but not as much as I think there should be. Then again, there is a persistant head on the beer and I don’t know that such a thing is possible without steady carbonation.

Anyway, I’ve kegged another beer and now have it force carbonating as well. My “Adventure Ale” will not have a beer line connected to it until it has sat under CO2 pressure (10psi @ 35°F) for at least three weeks. We will see if I end up with better carbonation results than I did with the German Kölsch. One thing I intend to do before too long is build a small plenum inside the keezer to keep the cold air moving inside, instead of all just settling down on the floor. There is a fairly significant, at least if you’re CO2 dissolved into an aqueous solution, temperature gradient from the floor (35°F) of the keezer to the shanks for my faucets (39°F). Right now, my best guess is that the temperature gradient is responsible for loss of carbonation between the keg and my glass.

German Kölsch